|Fig.1 Crescent Wrench 4 inch|
Tools and Supplies:
George Baker called my advertisement on a local paper and found my repair service. He had a plumber replace his bathroom faucet and fill lines and now the plumber refused to return to fix the problem. The cold water faucet was hot and the hot water faucet was cold. He needed a quick fix.
This post shows the two steps to fix this solution.
Step 1: Fig.1 shows a 4-inch Crescent Wrench needed to remove the water lines near the stop valve and cross the the lines. It was a simple fix, the lines were reversed and the water fill lines had to be crossed to fix the problem.
Step 2: Fig.2 shows the lines are crossed. Now the faucet is working correctly like it should have worked when George had his new faucet replaced.
|Fig.2 Problem solved|
Update: DIY Advisor has New blogs check them today:
- Handyman Blog: DIY Advisor
- DIY Advisor Sitemap
- Food Blog: From Kiwis To Pistachios!
- Food Blog Sitemap
- Tool Blog: DIY Advisor Toolbox
- Tool Blog Sitemap
- Artwork Blog: Light in Dark Artwork
- Artwork Blog Sitemap
- Class-A Tests: DIY Class-A Drivers License Tests
- Class-A Tests Sitemap: Class-A Sitemap
- DIY Poem: DIY Poem Meter Blog
- DIY Poem Sitemap: DIY Sitemap!
Note: The DIY Advisor assumes no liability for omissions, errors or the outcome of any jobs. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed contractor if in doubt about any steps on these posts. All names were changed to protect client's privacy. DIY Advisor. Reproduction of site content including photos without permission prohibited. All rights reserved. © Copyright 2011-